Details - WFT-E1A Utility 2.0 for Mac OS X 
ID: 0900009701_EN_1

Driver/Software Details
File Name
WFT-E1A_2.0_EN.dmg
File Version
2.0
File Size
.57 MB
File Languages
English
Post Date
08/01/2006
Download and Installation Instructions
WFT-E1A Utility 2.0 for Mac OS X
Outline of the software
WFT-E1A Utility 2.0A is the software that enables your EOS digital camera to send the captured images through the attached Wireless File Transmitter WFT-E1A to an FTP server via a wireless or wired LAN.
Customers using the following models of EOS digital cameras can use the installer at the bottom of this page to install WFT-E1A Utility 2.0.
EOS-1Ds Mark II, EOS-1D Mark II N, EOS-1D Mark II, EOS 5D, EOS 30D, EOS 20D and EOS 20Da.
Precautions
1. The software is exclusively for Wireless File Transmitter WFT-E1A.
2. Your personal computer should meet the following requirements for software operation:
- Use Mac OS X (10.2 - 10.3).
- Network port (wired or wireless LAN) is required (necessary for certain functions).
Changes:
Compare to WFT-E1A Utility 1.0, WFT-E1A Utility 2.0 has been changed in the following ways.
1. The connection status between the FTP server and the camera can now be verified (*).
2. Searching for wireless LAN equipment and getting setup information is now possible (*).
3. The Message Display function for an inappropriate value input has been improved.
4. Up to 20 communication configuration files can now be registered.
5. Communication configuration files can be created through wizard (*).
* Network port (wired or wireless LAN) is required for the computer.
Software Download and Installation Method
Please quit other applications before installation.
1. If WFT-E1A Utility 1.0 is currently installed, please remove the file to the trash can and delete it.
2. Click the file at the bottom of this page to start downloading.
3. Once downloading is complete, the file will automatically extract. A disk icon named "English" will be displayed on the desktop.
The disk icon may open automatically.
4. WFT-E1A Utility and License.txt inside the disk icon will be copied to the hard disk.
Please read the LICENSE.txt before launching WFT-E1A Utility 2.0.
5. Double-click WFT-E1A Utility to start the installer. When the WFT-E1A Setup Wizard displays, configure the connection between the camera and the personal computer.
If the connection configuration is already done or other situations that make the wizard is unnecessary, click Cancel.
Please refer to the manual of Wireless File Transmitter WFT-E1A for details regarding the configuration.
Downloading instruction manuals and opening the file
Please refer to the following instructions for downloading instruction manuals and opening the file.
The instruction manual is a PDF file.
When printing this file, the watermark "COPY" will appear on each print.
1. Click the file at the bottom of this page to start downloading.
When a dialogue box displays, specify the file name and the download destination then click OK.
2. When the downloading is complete, double-click the file's icon to open it.
According to your computer's setting, the file may open automatically once the downloading is completed.
Download
WFT-E1A Utility 2.0 for Mac OS X
(588 KB) 
Wireless File Transmitter WFT-E1A Instruction Manual
(1.83 MB) 
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.