Details - Cinema RAW Development 1.2 for Mac OS X
ID: 0200343702_EN_1
Software for developing, playing back, and exporting the RAW clips captured with Canon's digital cinema cameras.

How to Download and Install
Please refer to the instructions below on how to download and install the software.
Exit all other applications when installing this software.

1. Download "crdm-1-2-0-7-9l.dmg.gz" from the download page.

2. Double-click "crdm-1-2-0-7-9l.dmg.gz". After decompressing the file, "crdm-1-2-0-7-9l.dmg" will be created.

3. Double-click "crdm-1-2-0-7-9l.dmg". The disk image "crdm12" will be mounted.

4. Double-click the installer, "CRDInstaller" in "crdm12".

5. Follow the on-screen instructions to complete the installation.
Driver/Software Details
File Name
File Version
File Size
60.18 MB
File Languages
English | Japanese
Post Date
Changes for Cinema RAW Development 1.2 for Mac OS X :

- 4K1K RAW clip is now supported.
- Clips shot with DCI-P3+/Cinema Gamut being set are now supported.
- Export of material data where BT.709 / Wide DR / DCI gamma is applied is now supported.
- Upgraded the "Input Device Transform (IDT)" used for exporting OpenEXR files to version 1.1.
Required System Configuration:

To use this software, your computer has to meet the following system requirements.

1. Supported OS
Mac OS X 10.7, OS X 10.8

2. Supported computers
A Mac computer supporting the OS above (excluding the followings where the operation is not guaranteed).
iMac : Late 2006
Mac mini : Mid 2007
MacBook : Late 2006, Mid 2007, Late 2007, Early 2008
MacBook Air : Early 2008

- A GPU that supports CUDA (Compute Capability 2.0 or higher), manufactured by NVIDIA. 
The processing performance should be lower on a computer that has no supporting GPU.
For details, please see Cautions and limitations file (in PDF format) that is included in the downloaded file.

- 4 GB or more

SDI Board (required for checking the SDI output on a monitor)
- AJA KONA 3G (Driver V10.4.7)
There are restrictions to monitors that can be connected and output frame rates.
For details, please see the Cautions and limitations file (in PDF format) that is included in the downloaded files.

3. Display
- Resolution: 1,024×768 or higher

4. Supported Models
EOS C500, EOS C500 PL

Recommended System Configuration:

In order to preview RAW clips at 24fps, we recommend the following system specifications In addition to the necessary system requirements listed above.

- OS X 10.8.3

- Intel Xeon 2.8 GHz Quad Core or faster

- NVIDIA Quadro K5000 for Mac

- 16 GB or more

- Read 300 MB/s or higher
It is recommended that the drive to which [RAW CLIPS] are saved and the drive to which [Full-quality Files] and [Proxy Files] are saved are on different devices.
The Cinema RAW Development 1.2 (CRDInstaller) file and Cautions and limitations file (in PDF format in two Japanese and English) are included in the downloaded file.
Read through the cautions and limitations before installing Cinema RAW Development 1.2.
Zip Type
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.